PartsTable
Technical Data Sheet
Download PDF

70009PC13 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

70009PC13: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, minor_width: 0.062 INCHES NOMINAL IN, construction: SOLID, minor_height: 0.125 INCHES NOMINAL IN, aperture_width: 1.265 INCHES MINIMUM AND 1.290 INCHES MAXIMUM IN, aperture_length: 5.930 INCHES MINIMUM AND 5.950 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-235-6265, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70009PC13
NSN: 5330-00-235-6265
FSC: 5330 — Packing and Gasket Materials
CAGE: 47496 — THE DEWEY ELECTRONICS CORPORATION DIV PITOMETER LOG DIVISION (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
minor_width0.062 INCHES NOMINAL IN
constructionSOLID
minor_height0.125 INCHES NOMINAL IN
aperture_width1.265 INCHES MINIMUM AND 1.290 INCHES MAXIMUM IN
aperture_length5.930 INCHES MINIMUM AND 5.950 INCHES MAXIMUM IN
style_designatorOVAL
fabrication_methodSOLID
cross-sectional_width0.500 INCHES NOMINAL IN
cross-sectional_height0.312 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
material_document_and_classificationASTM D2000 2BC805 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-235-6265
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70009PC13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.500 INCHES NOMINAL IN
•
MINOR HEIGHT: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: OVAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC805 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
APERTURE WIDTH: 1.265 INCHES MINIMUM AND 1.290 INCHES MAXIMUM IN
•
MINOR WIDTH: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.312 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.500 INCHES NOMINAL IN
MINOR HEIGHT0.125 INCHES NOMINAL IN
STYLE DESIGNATOROVAL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC805 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESPECIAL
APERTURE WIDTH1.265 INCHES MINIMUM AND 1.290 INCHES MAXIMUM IN
MINOR WIDTH0.062 INCHES NOMINAL IN
APERTURE LENGTH5.930 INCHES MINIMUM AND 5.950 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
50137-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 70009PC13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70009PC13?
70009PC13 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 70009PC13?
There is 1 known substitute for 70009PC13: 50137-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 70009PC13?
70009PC13 is cataloged in the U.S. Government catalog under NSN 5330-00-235-6265. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70009PC13