PartsTable
Technical Data Sheet
Download PDF

70009-174 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

70009-174: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.278 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN, thread_length: 1.500 INCHES MINIMUM AND 1.727 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES THREADS, fastener_length: 4.406 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-724-6760, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70009-174
NSN: 5305-00-724-6760
FSC: 5305 — Screws
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.278 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
thread_classA
thread_length1.500 INCHES MINIMUM AND 1.727 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length4.406 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
nominal_thread_diameter0.625 INCHES IN
NSN5305-00-724-6760
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 70009-174 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
•
HEAD HEIGHT: 0.278 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
•
FASTENER LENGTH: 4.406 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TTY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.500 INCHES MINIMUM AND 1.727 INCHES MAXIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GRADE5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES THREADS
HEAD HEIGHT0.278 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN
FASTENER LENGTH4.406 INCHES MINIMUM AND 4.500 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TTY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.500 INCHES MINIMUM AND 1.727 INCHES MAXIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GRADE5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.625 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 6
F311Reference document
Same NSN cross-reference
Reference document — Secondary reference
NASM90725Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MS90725-174Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-85Reference document
Same NSN cross-reference
Reference document — Identification reference
5305PL0687222Reference document
Same NSN cross-reference
Reference document — Informative reference only
13-1072Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 70009-174?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70009-174?
70009-174 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 70009-174?
There are 6 known substitutes for 70009-174: F311, NASM90725, MS90725-174 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70009-174?
70009-174 is cataloged in the U.S. Government catalog under NSN 5305-00-724-6760. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70009-174

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.