PartsTable
Technical Data Sheet
Download PDF

70008-44 — CYLINDE HOIST ASY

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

70008-44: CYLINDE HOIST ASY.

The CYLINDE HOIST ASY is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.875 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES THREADS, fastener_length: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-225-9099, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70008-44
NSN: 5305-00-225-9099
NIINs: 002259099, 007000844
FSC: 5305 — Screws
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
thread_class2A A
thread_length0.875 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
hardness_rating25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
NSN5305-00-225-9099
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 70008-44 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
•
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.875 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN
•
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES THREADS
HEAD HEIGHT0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM IN
FASTENER LENGTH2.906 INCHES MINIMUM AND 3.000 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.875 INCHES MINIMUM AND 1.063 INCHES MAXIMUM IN
HARDNESS RATING25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 6
181624Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
FF-S-85Reference document
Same NSN cross-reference
Reference document — Identification reference
MS90726-44Reference document
Same NSN cross-reference
Reference document — Secondary reference
25085957Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
NASM90726Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5306002259099Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 70008-44?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70008-44?
70008-44 is a CYLINDE HOIST ASY.
What parts can replace 70008-44?
There are 6 known substitutes for 70008-44: 181624, FF-S-85, MS90726-44 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70008-44?
70008-44 is cataloged in the U.S. Government catalog under NSN 5305-00-225-9099. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70008-44

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.