PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70008-115
70008-115 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN, fastener_length: 2.000 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-226-7768, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70008-115
NSN: 5305-00-226-7768
FSC: 5305
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN
fastener_length2.000 INCHES NOMINAL IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
minimum_yield_strength85000 POUNDS PER SQUARE INCH LBS
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
NSN5305-00-226-7768
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 70008-115 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.000 INCHES NOMINAL IN
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SAE/AMS QQ-P-416 TY2CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.500 INCHES IN
WIDTH BETWEEN FLATS0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
FASTENER LENGTH2.000 INCHES NOMINAL IN
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSAE/AMS QQ-P-416 TY2CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
THREAD SERIES DESIGNATORUNF
THREAD LENGTH1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
NASM90725Interchangeable
interchangeable cross-reference
interchangeable
5768-10Interchangeable
interchangeable cross-reference
interchangeable
B1004 15991Interchangeable
interchangeable cross-reference
interchangeable
13-1032Interchangeable
interchangeable cross-reference
interchangeable
FF-S-85 TY2ST10PGR5Interchangeable
interchangeable cross-reference
interchangeable
MS90725-164Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70008-115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70008-115?
70008-115 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 70008-115?
There are 30 known substitutes for 70008-115: NASM90725, 5768-10, B1004 15991 and 27 more. Substitute compatibility should be verified for your specific system.
Is 70008-115 still available?
70008-115 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70008-115

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026