PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70008-114

70008-114 — Technical Data Sheet

✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN, fastener_length: 1.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 5305-00-725-4187, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70008-114
NSN: 5305-00-725-4187
FSC: 5305
CAGE: 95097 — LITTLE GIANT CRANE AND SHOVEL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM IN
thread_class2A A
thread_length1.250 INCHES MINIMUM AND 1.438 INCHES MAXIMUM IN
fastener_length1.750 INCHES NOMINAL IN
hardness_rating23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_between_flats0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nominal_thread_diameter0.500 INCHES IN
minimum_tensile_strength120000 POUNDS PER SQUARE INCH LBS
NSN5305-00-725-4187
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 70008-114 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL OVERALL
•
THREAD QUANTITY PER INCH: 20
•
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH LBS
•
THREAD CLASS: 2A A
•
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL OVERALL
THREAD QUANTITY PER INCH20
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
THREAD CLASS2A A
HARDNESS RATING23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
FFB571ANDTYPEB2ANDCLASSCInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
60-8-16InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
147725InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ASME-B18.2.1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FF-S-85InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
HBZSF813051-01InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70008-114?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70008-114?
70008-114 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 70008-114?
There are 16 known substitutes for 70008-114: FFB571ANDTYPEB2ANDCLASSC, 60-8-16, 147725 and 13 more. Substitute compatibility should be verified for your specific system.
Is 70008-114 still available?
70008-114 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70008-114

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026