PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70005PC38
70005PC38 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, rim_surface_width: 0.125 INCHES NOMINAL IN, peripheral_diameter: 5.875 INCHES NOMINAL IN, center_hole_diameter: 5.625 INCHES NOMINAL IN, cross-sectional_shape_style: CUP. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-400-8448, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70005PC38
NSN: 5330-00-400-8448
FSC: 5330
CAGE: 47496 — THE DEWEY ELECTRONICS CORPORATION DIV PITOMETER LOG DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
rim_surface_width0.125 INCHES NOMINAL IN
peripheral_diameter5.875 INCHES NOMINAL IN
center_hole_diameter5.625 INCHES NOMINAL IN
cross-sectional_shape_styleCUP
NSN5330-00-400-8448
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70005PC38 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RIM SURFACE WIDTH: 0.125 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 5.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
CENTER HOLE DIAMETER: 5.625 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
RIM SURFACE WIDTH0.125 INCHES NOMINAL IN
PERIPHERAL DIAMETER5.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECUP
CENTER HOLE DIAMETER5.625 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
470-03-1003Interchangeable
interchangeable cross-reference
interchangeable
69-032679-078Interchangeable
interchangeable cross-reference
interchangeable
MF25D1003FInterchangeable
interchangeable cross-reference
interchangeable
10-7501Interchangeable
interchangeable cross-reference
interchangeable
7376293Interchangeable
interchangeable cross-reference
interchangeable
GPS-1000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70005PC38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70005PC38?
70005PC38 is a PACKING,PREFORMED.
What parts can replace 70005PC38?
There are 6 known substitutes for 70005PC38: 470-03-1003, 69-032679-078, MF25D1003F and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70005PC38?
70005PC38 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-400-8448. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70005PC38

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026