700041-1 — ARM,STEERING GEAR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

700041-1: ARM,STEERING GEAR.

The ARM,STEERING GEAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 615 OUTER LAYER, corner_shape: CHAMFERED INSIDE RIGHT CORNER, flange_width: 0.1500 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM IN, overall_length: 0.1850 INCHES MINIMUM AND 0.1950 INCHES MAXIMUM IN, hardness_rating: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL, special_features: FLANGE END AND BODY END FLAT WITHIN 0.0002 IN. TIR,BODY END PERPENDICULAR TO FLANGE WITHIN 0.0010 IN.

TIR IN. This part is cataloged in the U.S. Government catalog under NSN 2530-00-700-0411, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

700041-1

NSN: 2530-00-700-0411
NIINs: 007000411, 009028337
FSC: 2530 — Vehicular Brake, Steering, Axle, Wheel, and Track Components
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)

SPECIFICATIONS

material	STEEL COMP 615 OUTER LAYER
corner_shape	CHAMFERED INSIDE RIGHT CORNER
flange_width	0.1500 INCHES MINIMUM AND 0.1600 INCHES MAXIMUM IN
overall_length	0.1850 INCHES MINIMUM AND 0.1950 INCHES MAXIMUM IN
hardness_rating	32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
special_features	FLANGE END AND BODY END FLAT WITHIN 0.0002 IN. TIR,BODY END PERPENDICULAR TO FLANGE WITHIN 0.0010 IN. TIR IN
style_designator	SOLID, EXTERNAL FLANGE ONE END
body_inside_diameter	0.3200 INCHES MINIMUM AND 0.3300 INCHES MAXIMUM IN
body_outside_diameter	0.6400 INCHES MINIMUM AND 0.6700 INCHES MAXIMUM IN
flange_outside_diameter	0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
material_document_and_classification	AMS 5616 ASSN STD SINGLE MATERIAL RESPONSE OUTER LAYER
NSN	2530-00-700-0411

COMPONENT DIAGRAM

KEY FEATURES

•

DRAG LINK END CHARACTERISTIC: W/REPLACEABLE BALL STUD

•

SECTOR SHAFT MOUNTING END OVERALL THICKNESS: 1.313 INCHES NOMINAL IN

•

TAPER: 1.000 PER FOOT IN INCHES NOMINAL

•

TEETH QUANTITY: 32

•

SECTOR SHAFT MOUNTING END OVERALL WIDTH: 2.250 INCHES NOMINAL IN

•

DESIGN TYPE: OFFSET

•

SERRATION INCLUDED ANGLE IN DEG: 80.0

•

SECTOR SHAFT MOUNTING END SERRATED BORE: INCLUDED

TECHNICAL CHARACTERISTICS

DRAG LINK END CHARACTERISTIC	W/REPLACEABLE BALL STUD
SECTOR SHAFT MOUNTING END OVERALL THICKNESS	1.313 INCHES NOMINAL IN
TAPER	1.000 PER FOOT IN INCHES NOMINAL
TEETH QUANTITY	32
SECTOR SHAFT MOUNTING END OVERALL WIDTH	2.250 INCHES NOMINAL IN
DESIGN TYPE	OFFSET
SERRATION INCLUDED ANGLE IN DEG	80.0
SECTOR SHAFT MOUNTING END SERRATED BORE	INCLUDED
DIAMETER	0.990 INCHES MINIMUM AND 0.995 INCHES MAXIMUM IN
SMALL END MAJOR DIAMETER	1.262 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 1

268658Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

No demilitarization required

Ready to buy 700041-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 700041-1?

700041-1 is a ARM,STEERING GEAR.

What parts can replace 700041-1?

There is 1 known substitute for 700041-1: 268658. Substitute compatibility should be verified for your specific system.

What is the NSN for 700041-1?

700041-1 is cataloged in the U.S. Government catalog under NSN 2530-00-700-0411. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

700041-1 — ARM,STEERING GEAR

Request a Quote — 700041-1