PartsTable
Technical Data Sheet
Download PDF

70001-223 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

70001-223: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: RUBBER, design_type: MOLDED, overall_diameter: 0.250 INCHES NOMINAL IN, special_features: COLOR IS BLUE, end_item_identification: 3805-01-533-1853, part_name_assigned_by_controlling_agency: QUICK COUPLING DUST PLUG. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-460-2922, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70001-223
NSN: 5340-01-460-2922
FSC: 5340 — Hardware, Commercial
CAGE: 21439 — CURTISS-WRIGHT FLOW CONTROL SERVICE, LLC DBA ENGINEERED ARRESTING SYSTEMS - ESCO DIV CW FLOW CONTROL SVC LLC DBA (USA)
SPECIFICATIONS
materialRUBBER
design_typeMOLDED
overall_diameter0.250 INCHES NOMINAL IN
special_featuresCOLOR IS BLUE
end_item_identification3805-01-533-1853
part_name_assigned_by_controlling_agencyQUICK COUPLING DUST PLUG
NSN5340-01-460-2922
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70001-223 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: MOLDED
•
OVERALL DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
DESIGN TYPEMOLDED
OVERALL DIAMETER0.250 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR IS BLUE
PART NAME ASSIGNED BY CONTROLLING AGENCYQUICK COUPLING DUST PLUG
END ITEM IDENTIFICATION3805-01-533-1853
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 6
MVSF0209Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MVSF0210Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5342PL0680055Reference document
Same NSN cross-reference
Reference document — Informative reference only
FR-25Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
FF2516Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF2526Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 70001-223?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70001-223?
70001-223 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 70001-223?
There are 6 known substitutes for 70001-223: MVSF0209, MVSF0210, 5342PL0680055 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70001-223?
70001-223 is cataloged in the U.S. Government catalog under NSN 5340-01-460-2922. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70001-223