PartsTable
Technical Data Sheet
PartsTable / MRO / 700-942
700-942 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL SERVO MOUNTED, bore_shape: STRAIGHT, body_length: 1.695 INCHES MAXIMUM IN, shaft_style: ROUND, pilot_length: 0.0620 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7925, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 700-942
NSN: 3110-00-156-7925
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL SERVO MOUNTED
bore_shapeSTRAIGHT
body_length1.695 INCHES MAXIMUM IN
shaft_styleROUND
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.500 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeDOUBLE ENDED SHAFT
body_diameter0.875 INCHES NOMINAL IN
bore_diameter55.00 MILLIMETERS NOMINAL MM
overall_width1.3125 INCHES NOMINAL IN
NSN3110-00-156-7925
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 700-942 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
SHIELD QUANTITY: 1
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
NONDEFINITIVE SPEC/STD DATA: 146GR00 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
SHIELD QUANTITY1
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
NONDEFINITIVE SPEC/STD DATA146GR00 TYPE
MATERIALSTEEL OVERALL
BORE SHAPESTRAIGHT
OVERALL OUTSIDE DIAMETER100.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
A-A-59640Interchangeable
interchangeable cross-reference
interchangeable
01-49-01Interchangeable
interchangeable cross-reference
interchangeable
5201Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/36J05D2XInterchangeable
interchangeable cross-reference
interchangeable
700943Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171B SUPP 1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 700-942?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700-942?
700-942 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 700-942?
There are 32 known substitutes for 700-942: A-A-59640, 01-49-01, 5201 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 700-942?
700-942 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-7925. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700-942

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026