PartsTable
Technical Data Sheet
Download PDF

700-908-433 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

700-908-433: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.818 INCHES NOMINAL IN, center_hole_diameter: 0.637 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-290-2117, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
700-908-433
NSN: 5330-01-290-2117
FSC: 5330 — Packing and Gasket Materials
CAGE: 10941 — CARVER PUMP COMPANY (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
hardness_rating75.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.818 INCHES NOMINAL IN
center_hole_diameter0.637 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
departure_from_cited_documentMATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
criticality_code_justificationZZZW
NSN5330-01-290-2117
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 700-908-433 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
DEPARTURE FROM CITED DOCUMENT: MATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
•
PERIPHERAL DIAMETER: 0.818 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.637 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL OVERALL
CRITICALITY CODE JUSTIFICATIONZZZW
ELONGATION PERCENTAGE125 MAXIMUM
DEPARTURE FROM CITED DOCUMENTMATERIAL WILL BE IN ACCORDANCE WITH NAVICP MECH; ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS.
PERIPHERAL DIAMETER0.818 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.637 INCHES MINIMUM AND 0.651 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
SUBSTITUTES & CROSS-REFERENCES 9
E-347PC29Reference document
Same NSN cross-reference
Reference document — Secondary reference
104-ADET4Reference document
Same NSN cross-reference
Reference document — Secondary reference
700-908-433CReference document
Same NSN cross-reference
Reference document — Secondary reference
M83248/1-908Reference document
Same NSN cross-reference
Reference document — Identification reference
PL-200138FPC563Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
7647281 ITEM F-114Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
HAZMAT per U.S. Government catalogAcquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 700-908-433?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700-908-433?
700-908-433 is a PACKING,PREFORMED.
What parts can replace 700-908-433?
There are 9 known substitutes for 700-908-433: E-347PC29, 104-ADET4, 700-908-433C and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 700-908-433?
700-908-433 is cataloged in the U.S. Government catalog under NSN 5330-01-290-2117. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700-908-433

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.