PartsTable
Technical Data Sheet
PartsTable / MRO / 700-598
700-598 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL SERVO MOUNTED, bore_shape: STRAIGHT, body_length: 0.810 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5236, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 700-598
NSN: 3110-00-554-5236
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL SERVO MOUNTED
bore_shapeSTRAIGHT
body_length0.810 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.500 INCHES NOMINAL IN
shaft_runout0.0015 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter0.875 INCHES NOMINAL IN
bore_diameter25.00 MILLIMETERS NOMINAL MM
NSN3110-00-554-5236
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 700-598 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
MATERIALSTEEL OVERALL
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
OVERALL WIDTH15.0 MILLIMETERS NOMINAL MM
SHIELD QUANTITY1
BORE DIAMETER25.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
10075Interchangeable
interchangeable cross-reference
interchangeable
1567Interchangeable
interchangeable cross-reference
interchangeable
E6Interchangeable
interchangeable cross-reference
interchangeable
3620Interchangeable
interchangeable cross-reference
interchangeable
C12270Interchangeable
interchangeable cross-reference
interchangeable
53175Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 700-598?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700-598?
700-598 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 700-598?
There are 29 known substitutes for 700-598: 10075, 1567, E6 and 26 more. Substitute compatibility should be verified for your specific system.
Is 700-598 still available?
700-598 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700-598

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026