700-1749 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

700-1749: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL COMP 1010, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 2.593 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT, construction: ONE-PIECE. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-089-6907, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 700-1749

NSN: 5905-00-089-6907
NIINs: 000896907, 007001749
FSC: 5905 — Resistor
CAGE: 02111 — VISHAY SPRAGUE INC (USA)

SPECIFICATIONS

material	STEEL COMP 1010
body_style	CYLINDRICAL SERVO MOUNTED
body_length	2.593 INCHES MAXIMUM IN
shaft_style	ROUND
bearing_type	BALL SHAFT
construction	ONE-PIECE
pilot_length	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
shaft_length	0.375 INCHES NOMINAL IN
shaft_runout	0.001 INCHES IN
actuator_type	SINGLE SHAFT
body_diameter	0.775 INCHES NOMINAL IN
overall_width	1.063 INCHES NOMINAL IN
NSN	5905-00-089-6907

COMPONENT DIAGRAM

KEY FEATURES

•

MAXIMUM RUNNING TORQUE: 0.90 INCH-OUNCES IN

•

BODY DIAMETER: 0.775 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE PER SECTION: 12.5 KILOHMS 1ST SECTION AND 8.75 KILOHMS 2ND SECTION AND 8.75 KILOHMS 3RD SECTION AND 35.0 KILOHMS 4TH SECTION AND 50.0 KILOHMS 5TH SECTION

•

MOUNTING LIP DEPTH: 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 125.0 ALL SECTIONS

•

UNDERCUT WIDTH: 0.0570 INCHES MINIMUM IN

•

SECTION QUANTITY: 5

•

SHAFT DIAMETER: 0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

MAXIMUM RUNNING TORQUE	0.90 INCH-OUNCES IN
BODY DIAMETER	0.775 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION	12.5 KILOHMS 1ST SECTION AND 8.75 KILOHMS 2ND SECTION AND 8.75 KILOHMS 3RD SECTION AND 35.0 KILOHMS 4TH SECTION AND 50.0 KILOHMS 5TH SECTION
MOUNTING LIP DEPTH	0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	125.0 ALL SECTIONS
UNDERCUT WIDTH	0.0570 INCHES MINIMUM IN
SECTION QUANTITY	5
SHAFT DIAMETER	0.1245 INCHES MINIMUM AND 0.1247 INCHES MAXIMUM IN
UNDERCUT DIAMETER	0.748 INCHES MINIMUM AND 0.755 INCHES MAXIMUM IN
FUNCTION CHARACTERISTIC PER SECTION	ALL SECTIONS LINEAR

SUBSTITUTES & CROSS-REFERENCES 5

700-1742Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LT09-138AReference document

Same NSN cross-reference

Reference document — Secondary reference

1733Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

910017-3CSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

10876-1REVCReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 700-1749?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 700-1749?

700-1749 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).

What parts can replace 700-1749?

There are 5 known substitutes for 700-1749: 700-1742, LT09-138A, 1733 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 700-1749?

700-1749 is cataloged in the U.S. Government catalog under NSN 5905-00-089-6907. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

700-1749 — RESISTOR,VARIABLE,WIRE WOUND,PRE

Request a Quote — 700-1749