PartsTable
Technical Data Sheet
Download PDF

700-170 — 700-170

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

700-170: 700-170.

The 700-170 is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CONTACT, overall_height: 0.101 INCHES NOMINAL IN, overall_length: 0.450 INCHES NOMINAL IN, mounting_method: CLAMP, style_designator: COAXIAL CONTACT, end_item_identification: AIRCRAFT EAGLE F-15. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-808-0794, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 700-170
NSN: 5331-00-808-0794
NIINs: 008080794, 010675973
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialCOPPER ALLOY CONTACT
overall_height0.101 INCHES NOMINAL IN
overall_length0.450 INCHES NOMINAL IN
mounting_methodCLAMP
style_designatorCOAXIAL CONTACT
end_item_identificationAIRCRAFT EAGLE F-15
terminal_type_and_quantity1 CRIMP AXIALLY AT ONE END
NSN5331-00-808-0794
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 700-170 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.803 INCHES MINIMUM AND 0.833 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
END ITEM IDENTIFICATION3990-01-444-5196 CEMENT MIXER; RG-31 MRAP; MEDIUM MINE PROTECTED VEHICLE - AMPV; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
F-14260-8Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
142A23S06X12RReference document
Same NSN cross-reference
Reference document — Secondary reference
MS-28778-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
38R039P006Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
547790ITEM96Reference document
Same NSN cross-reference
Reference document — Secondary reference
2979-44ALT3PCK3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 700-170?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 700-170?
700-170 is a 700-170. It is classified as a MRO (MRO_GENERAL).
What parts can replace 700-170?
There are 9 known substitutes for 700-170: F-14260-8, 142A23S06X12R, MS-28778-8 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 700-170?
700-170 is cataloged in the U.S. Government catalog under NSN 5331-00-808-0794. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 700-170