70-G-016-MPC14 — GASKET

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

70-G-016-MPC14: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.845 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN, aperture_width: 2.218 INCHES MINIMUM AND 2.259 INCHES MAXIMUM IN, overall_length: 7.158 INCHES MINIMUM AND 7.218 INCHES MAXIMUM IN, aperture_length: 5.781 INCHES MINIMUM AND 5.822 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-134-5827, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

70-G-016-MPC14

NSN: 5330-01-134-5827
FSC: 5330 — Packing and Gasket Materials
CAGE: 53553 — AMETEK INC SCHUTTE AND KOERTING DIV (USA)

SPECIFICATIONS

material	RUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width	2.845 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN
aperture_width	2.218 INCHES MINIMUM AND 2.259 INCHES MAXIMUM IN
overall_length	7.158 INCHES MINIMUM AND 7.218 INCHES MAXIMUM IN
aperture_length	5.781 INCHES MINIMUM AND 5.822 INCHES MAXIMUM IN
hardness_rating	20.0 SHORE DUROMETER A NOMINAL OVERALL
style_designator	NON-CIRCULAR
bolt_hole_quantity	4
inside_corner_radius	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
outside_corner_radius	0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
cross-sectional_thickness	0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
NSN	5330-01-134-5827

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL THICKNESS: 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN

•

INSIDE CORNER RADIUS: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN

•

HARDNESS RATING: 20.0 SHORE DUROMETER A NOMINAL OVERALL

•

STYLE DESIGNATOR: NON-CIRCULAR

•

APERTURE WIDTH: 2.218 INCHES MINIMUM AND 2.259 INCHES MAXIMUM IN

•

APERTURE LENGTH: 5.781 INCHES MINIMUM AND 5.822 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL THICKNESS	0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM IN
INSIDE CORNER RADIUS	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
HARDNESS RATING	20.0 SHORE DUROMETER A NOMINAL OVERALL
STYLE DESIGNATOR	NON-CIRCULAR
OVERALL LENGTH	7.158 INCHES MINIMUM AND 7.218 INCHES MAXIMUM IN
OVERALL WIDTH	2.845 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN
APERTURE WIDTH	2.218 INCHES MINIMUM AND 2.259 INCHES MAXIMUM IN
APERTURE LENGTH	5.781 INCHES MINIMUM AND 5.822 INCHES MAXIMUM IN
BOLT HOLE QUANTITY	4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH	1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN

SUBSTITUTES & CROSS-REFERENCES 2

62G-0008M-1 PIECE 14Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

61S-0539M-001Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 70-G-016-MPC14?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 70-G-016-MPC14?

70-G-016-MPC14 is a GASKET.

What parts can replace 70-G-016-MPC14?

There are 2 known substitutes for 70-G-016-MPC14: 62G-0008M-1 PIECE 14, 61S-0539M-001. Substitute compatibility should be verified for your specific system.

What is the NSN for 70-G-016-MPC14?

70-G-016-MPC14 is cataloged in the U.S. Government catalog under NSN 5330-01-134-5827. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

70-G-016-MPC14 — GASKET

Request a Quote — 70-G-016-MPC14