PartsTable
Technical Data Sheet
Download PDF

70-70-510 — FASTENER,PAWL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

70-70-510: FASTENER,PAWL.

The FASTENER,PAWL is a the manufacturer industrial component. Key specifications include width: 3.500 INCHES NOMINAL IN, height: 4.500 INCHES NOMINAL IN, length: 2.563 INCHES NOMINAL IN, material: STEEL OVERALL, pawl_type: STRAIGHT, recess_cup_depth: 0.813 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-231-0927, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70-70-510
NSN: 5340-01-231-0927
FSC: 5340 — Hardware, Commercial
CAGE: U4542 — SUPACAT LIMITED (GBR)
SPECIFICATIONS
width3.500 INCHES NOMINAL IN
height4.500 INCHES NOMINAL IN
length2.563 INCHES NOMINAL IN
materialSTEEL OVERALL
pawl_typeSTRAIGHT
recess_cup_depth0.813 INCHES NOMINAL IN
style_designatorT-HANDLE
grip_handle_width3.250 INCHES NOMINAL IN
surface_treatmentZINC OVERALL
operational_directionRIGHT-HAND
pawl_actuation_methodGRIP HANDLE
pawl_length_from_actuating_shaft_center_to_pawl_end2.563 INCHES NOMINAL IN
NSN5340-01-231-0927
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 70-70-510 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATIONAL DIRECTION: RIGHT-HAND
•
GRIP HANDLE WIDTH: 3.250 INCHES NOMINAL IN
•
LENGTH: 2.563 INCHES NOMINAL IN
•
PAWL ACTUATION METHOD: GRIP HANDLE
•
RECESS CUP DEPTH: 0.813 INCHES NOMINAL IN
•
STYLE DESIGNATOR: T-HANDLE
•
PAWL TYPE: STRAIGHT
•
HEIGHT: 4.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OPERATIONAL DIRECTIONRIGHT-HAND
GRIP HANDLE WIDTH3.250 INCHES NOMINAL IN
LENGTH2.563 INCHES NOMINAL IN
PAWL ACTUATION METHODGRIP HANDLE
RECESS CUP DEPTH0.813 INCHES NOMINAL IN
STYLE DESIGNATORT-HANDLE
PAWL TYPESTRAIGHT
HEIGHT4.500 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
WIDTH3.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
24-20-302-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 70-70-510?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-70-510?
70-70-510 is a FASTENER,PAWL.
What parts can replace 70-70-510?
There is 1 known substitute for 70-70-510: 24-20-302-10. Substitute compatibility should be verified for your specific system.
What is the NSN for 70-70-510?
70-70-510 is cataloged in the U.S. Government catalog under NSN 5340-01-231-0927. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-70-510

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.