PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70-6-32
70-6-32 ✓ Verified by PartsTable
Rexel · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

Rexel Crystalfile™ Extra Suspension Files are made from tough polypropylene which typically lasts up to 5 times longer than manilla. With a wipe clean satin finish and featuring matching coloured runners and multi-positionable tabs, they come in boxes of 25. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-207-8568, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70-6-32
NSN: 5306-00-207-8568
FSC: 5306
CAGE: 99238 — AIR FORCE STANDARD
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length6.875 INCHES NOMINAL IN
pin_overall_diameter0.7460 INCHES MINIMUM AND 0.7480 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
second_end_relationship_with_first_endIDENTICAL
NSN5306-00-207-8568
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 70-6-32 · Rexel ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
NECK LENGTH: 0.281 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: C2 TYPE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: BUTTON
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD QUANTITY PER INCH: 16
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
NECK LENGTH0.281 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAC2 TYPE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEBUTTON
THREAD DIRECTIONRIGHT-HAND
THREAD QUANTITY PER INCH16
HEAD HEIGHT0.188 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
S3500H3100046PC102Interchangeable
interchangeable cross-reference
interchangeable
70632Interchangeable
interchangeable cross-reference
interchangeable
NAVYX2001PC36Interchangeable
interchangeable cross-reference
interchangeable
A7269Interchangeable
interchangeable cross-reference
interchangeable
47269Interchangeable
interchangeable cross-reference
interchangeable
80056Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70-6-32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-6-32?
70-6-32 is a SHAFT ASSY manufactured by Rexel.
What parts can replace 70-6-32?
There are 7 known substitutes for 70-6-32: S3500H3100046PC102, 70632, NAVYX2001PC36 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70-6-32?
70-6-32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-207-8568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-6-32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026