Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The PLATE,MOUNTING is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, width: 3.812 INCHES NOMINAL3.812 INCHES NOMINAL IN, length: 4.438 INCHES NOMINAL4.438 INCHES NOMINAL IN, material: ALUMINUM ALLOY 5052, thickness: 0.063 INCHES NOMINAL0.063 INCHES NOMINAL IN, corner_radius: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-243-5384, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
70-4024
NSN:5340-01-243-5384 FSC:5340 CAGE:30554 — DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER (USA)
SPECIFICATIONS
shape
RECTANGULAR
width
3.812 INCHES NOMINAL3.812 INCHES NOMINAL IN
length
4.438 INCHES NOMINAL4.438 INCHES NOMINAL IN
material
ALUMINUM ALLOY 5052
thickness
0.063 INCHES NOMINAL0.063 INCHES NOMINAL IN
corner_radius
0.062 INCHES NOMINAL IN
aperture_shape
ROUND
special_features
COLOR GRAY; FINISH ON FRONT SURFACE AND EDGES
features_provided
APERTURE
surface_treatment
LACQUER
mounting_hole_type
UNTHREADED
mounting_hole_diameter
0.104 INCHES NOMINAL FIRST HOLE IN
NSN
5340-01-243-5384
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE: HEXAGON
•
MATERIAL: ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 2011 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/3 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
SPECIFICATION/STANDARD DATA: 80250-NAS1831 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
•
SURFACE TREATMENT: ANODIZE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TYPE 1, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
WIDTH ACROSS FLATS: 0.246 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE
HEXAGON
MATERIAL
ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 2011 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-225/6 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-225/3 FED SPEC 2ND MATERIAL RESPONSE OVERALL
SPECIFICATION/STANDARD DATA
80250-NAS1831 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
STYLE DESIGNATOR
INTERNALLY THREADED FULL LENGTH
SURFACE TREATMENT
ANODIZE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-A-8625, TYPE 1, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OR MIL-A-8625, TYPE 2, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
WIDTH ACROSS FLATS
0.246 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
LENGTH
0.620 INCHES MINIMUM AND 0.630 INCHES MAXIMUM IN
END ITEM IDENTIFICATION
W/S:TORPEDO, ADCAP 48; TICONDEROGA CLASS CG (47); GENERATOR SET, DIESEL ENGINE, 100KW, PU-495; RADAR SET, FIREFINDER (AN/TPQ-36); AIRBORNE MOBILE DIR AIR SPT CTL (2ID),(02M JUL83)(AN/UYQ-3A); AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); SUPPORT EQ2UIPMENT, B-1 AIRCRAFT; RADAR SET, LIGHTWEIGHT 3D (AN/TPS-59); CENTRAL OFFICE, TELEPHONE AUTO A
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-4024?
70-4024 is a PLATE,MOUNTING.
What parts can replace 70-4024?
There are 22 known substitutes for 70-4024: 704024, 532353-628, SS6951-0632-2.500-01 and 19 more. Substitute compatibility should be verified for your specific system.
Is 70-4024 still available?
70-4024 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.