PartsTable
Technical Data Sheet
Download PDF

70-3S-2G — 70-3S-2G

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

70-3S-2G: 70-3S-2G.

The 70-3S-2G is a the manufacturer industrial component. Key specifications include skirt_style: FLARED, skirt_design: NONDETACHABLE, overall_depth: 0.620 INCHES NOMINAL IN, inside_diameter: 0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN, outside_diameter: 0.750 INCHES NOMINAL IN, screw_drive_type: HEXAGON SOCKET. This part is cataloged in the U.S.

Government catalog under NSN 5355-00-124-9279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70-3S-2G
NSN: 5355-00-124-9279
NIINs: 001249279, 004470083
FSC: 5355 — Knobs and Pointers
CAGE: 0B9Z1 — ELECTRONIC HARDWARE CORP PANEL PRODUCTS DIV (USA)
SPECIFICATIONS
skirt_styleFLARED
skirt_designNONDETACHABLE
overall_depth0.620 INCHES NOMINAL IN
inside_diameter0.252 INCHES MINIMUM AND 0.254 INCHES MAXIMUM IN
outside_diameter0.750 INCHES NOMINAL IN
screw_drive_typeHEXAGON SOCKET
special_featuresSKIRT SLOTTED 0.125 IN. WIDE BY 0.125 IN. LONG IN
style_designatorROUND
attachment_methodSETSCREWS
overall_thickness0.950 INCHES NOMINAL IN
reference_markingPUSH TO TURN
nominal_thread_size0.112 INCHES SCREW HOLE IN
NSN5355-00-124-9279
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available 70-3S-2G TITLE COMPONENT PN 70-3S-2G MFR 70-3S-2G
KEY FEATURES
•
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE: 0.369 INCHES MAXIMUM IN
•
SHAFT ACCOMMODATION STYLE: COUNTERBORED
•
OVERALL THICKNESS: 0.752 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
SKIRT OUTSIDE DIAMETER: 1.150 INCHES MAXIMUM IN
•
MATERIAL TRANSPARENCY: OPAQUE
•
STYLE DESIGNATOR: ROUND
•
OUTSIDE DIAMETER: 0.690 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
•
COUNTERBORE DEPTH: 0.188 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM HOLE CENTER TO KNOB/SKIRT BASE0.369 INCHES MAXIMUM IN
SHAFT ACCOMMODATION STYLECOUNTERBORED
OVERALL THICKNESS0.752 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
SKIRT OUTSIDE DIAMETER1.150 INCHES MAXIMUM IN
MATERIAL TRANSPARENCYOPAQUE
STYLE DESIGNATORROUND
OUTSIDE DIAMETER0.690 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
COUNTERBORE DEPTH0.188 INCHES MINIMUM IN
SETSCREW HOLE QUANTITY2
NOMINAL THREAD SIZE0.112 INCHES SCREW HOLE IN
SUBSTITUTES & CROSS-REFERENCES 7
7L2DSReference document
Same NSN cross-reference
Reference document — Secondary reference
NASM3926Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MIL-K-3926Reference document
Same NSN cross-reference
Reference document — Secondary reference
1H2BReference document
Same NSN cross-reference
Reference document — Secondary reference
71H4MAReference document
Same NSN cross-reference
Reference document — Secondary reference
507-3DS-2MReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 70-3S-2G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-3S-2G?
70-3S-2G is a 70-3S-2G.
What parts can replace 70-3S-2G?
There are 7 known substitutes for 70-3S-2G: 7L2DS, NASM3926, MIL-K-3926 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70-3S-2G?
70-3S-2G is cataloged in the U.S. Government catalog under NSN 5355-00-124-9279. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-3S-2G

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.