70-2806265-1 — NUT,CLIP-ON

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

70-2806265-1: NUT,CLIP-ON.

The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: FLOATING, thread_class: 3B, overall_width: 0.265 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), panel_thickness: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-571-6888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

70-2806265-1

NSN: 5310-01-571-6888
FSC: 5310 — Nuts and Washers
CAGE: 67032 — GENERAL DYNAMICS MISSION SYSTEMS, INC. (USA)

SPECIFICATIONS

material	STEEL CORROSION RESISTING OVERALL
nut_style	FLOATING
thread_class	3B
overall_width	0.265 INCHES NOMINAL IN
thread_series	UNIFIED NATIONAL JOINT FINE (UNJF)
panel_thickness	0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
nominal_thread_size	10.0 MILLIMETERS MM
end_item_identification	5895-01-467-7213, SYSTEM CONTROL GROUP,TECHNICAL
material_document_and_classification	A2B6 CASE PER AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE CLIP
distance_from_base_to_center_of_aperture	0.265 INCHES NOMINAL IN
part_name_assigned_by_controlling_agency	NUT ASSEMBLY, CLIP-ON
NSN	5310-01-571-6888

COMPONENT DIAGRAM

KEY FEATURES

•

THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)

•

DISTANCE FROM BASE TO CENTER OF APERTURE: 0.265 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: A2B6 CASE PER AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE CLIP

•

THREAD DIRECTION: RIGHT-HAND

•

PANEL THICKNESS: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

NOMINAL THREAD SIZE: 10.0 MILLIMETERS MM

TECHNICAL CHARACTERISTICS

THREAD SERIES	UNIFIED NATIONAL JOINT FINE (UNJF)
DISTANCE FROM BASE TO CENTER OF APERTURE	0.265 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	A2B6 CASE PER AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE CLIP
MATERIAL DOCUMENT AND CLASSIFICATION	A2B6 CASE PER AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE NUT
OVERALL WIDTH	0.265 INCHES NOMINAL IN
THREAD DIRECTION	RIGHT-HAND
PANEL THICKNESS	0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD SIZE	10.0 MILLIMETERS MM
PART NAME ASSIGNED BY CONTROLLING AGENCY	NUT ASSEMBLY, CLIP-ON
NUT STYLE	FLOATING

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 2

13100055-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

99002A8081Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 70-2806265-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 70-2806265-1?

70-2806265-1 is a NUT,CLIP-ON.

What parts can replace 70-2806265-1?

There are 2 known substitutes for 70-2806265-1: 13100055-1, 99002A8081. Substitute compatibility should be verified for your specific system.

What is the NSN for 70-2806265-1?

70-2806265-1 is cataloged in the U.S. Government catalog under NSN 5310-01-571-6888. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

70-2806265-1 — NUT,CLIP-ON

Request a Quote — 70-2806265-1