PartsTable
Technical Data Sheet

70-2-1/2IN150PSI — FLANGE,PIPE,BLIND

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

70-2-1/2IN150PSI: FLANGE,PIPE,BLIND.

The FLANGE,PIPE,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL, thickness: 0.844 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN, flange_diameter: 7.000 INCHES MINIMUM AND 7.088 INCHES MAXIMUM IN, style_designator: ROUND, ONE BOLT HOLE CIRCLE, surface_treatment: PRIMER AND PAINT, bolt_hole_diameter: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-024-0076, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70-2-1/2IN150PSI
NSN: 4730-01-024-0076
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 78824 — TUBE TURNS TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialSTEEL
thickness0.844 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
flange_diameter7.000 INCHES MINIMUM AND 7.088 INCHES MAXIMUM IN
style_designatorROUND, ONE BOLT HOLE CIRCLE
surface_treatmentPRIMER AND PAINT
bolt_hole_diameter0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
bolt_hole_quantity4
raised_face_height0.062 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
bolt_circle_diameter5.500 INCHES NOMINAL IN
flange_section_styleRAISED FACE (BLIND)
specification/standard_data80204-ANSI B16.5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
face_seating_surface_conditionMACHINED
NSN4730-01-024-0076
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 70-2-1/2IN150PSI · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 7.000 INCHES MINIMUM AND 7.088 INCHES MAXIMUM IN
•
FACE SEATING SURFACE CONDITION: MACHINED
•
NOMINAL PIPE SIZE FOR WHICH DESIGNED: 2.500 INCHES IN
•
FLANGE SECTION STYLE: RAISED FACE (BLIND)
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
•
BOLT HOLE DIAMETER: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A105,GRADE 2 ASSN STD SINGLE MATERIAL RESPONSE
•
SPECIFICATION/STANDARD DATA: 80204-ANSI B16.5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER7.000 INCHES MINIMUM AND 7.088 INCHES MAXIMUM IN
FACE SEATING SURFACE CONDITIONMACHINED
NOMINAL PIPE SIZE FOR WHICH DESIGNED2.500 INCHES IN
FLANGE SECTION STYLERAISED FACE (BLIND)
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
BOLT HOLE DIAMETER0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A105,GRADE 2 ASSN STD SINGLE MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA80204-ANSI B16.5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
BOLT HOLE QUANTITY4
BOLT CIRCLE DIAMETER5.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
4730-00-000-1895 4730-00-000-4289 4730-00-000-4445 4730-00-000-8373 4730-00-000-8897 4730-00-001-0007 4730-00-001-0008
SUBSTITUTES & CROSS-REFERENCES 1
ANSI B16.5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 70-2-1/2IN150PSI?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-2-1/2IN150PSI?
70-2-1/2IN150PSI is a FLANGE,PIPE,BLIND.
What parts can replace 70-2-1/2IN150PSI?
There is 1 known substitute for 70-2-1/2IN150PSI: ANSI B16.5. Substitute compatibility should be verified for your specific system.
What is the NSN for 70-2-1/2IN150PSI?
70-2-1/2IN150PSI is cataloged in the U.S. Government catalog under NSN 4730-01-024-0076. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-2-1/2IN150PSI

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.