PartsTable
Technical Data Sheet

70-150-2 1/2 — THERMAL RELEASE,CIRCUIT BREAKER

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

70-150-2 1/2: THERMAL RELEASE,CIRCUIT BREAKER.

THERMAL RELEASE,CIRCUIT BREAKER. Key specifications include material: STEEL, thickness: 0.875 INCHES NOMINAL IN, flange_diameter: 7.000 INCHES NOMINAL IN, style_designator: ROUND, ONE BOLT HOLE CIRCLE, bolt_hole_diameter: 0.750 INCHES NOMINAL IN, bolt_circle_diameter: 5.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-015-9329, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70-150-2 1/2
NSN: 4730-01-015-9329
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 78824 — TUBE TURNS TECHNOLOGIES INC (USA)
SPECIFICATIONS
materialSTEEL
thickness0.875 INCHES NOMINAL IN
flange_diameter7.000 INCHES NOMINAL IN
style_designatorROUND, ONE BOLT HOLE CIRCLE
bolt_hole_diameter0.750 INCHES NOMINAL IN
bolt_hole_quantity4
bolt_circle_diameter5.500 INCHES NOMINAL IN
flange_section_stylePLAIN FACE (BLIND)
specification/standard_data05047-ANSI B16.5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
face_seating_surface_conditionMACHINED
material_document_and_classificationASTM A181,GRADE 1 ASSN STD SINGLE MATERIAL RESPONSE
nominal_pipe_size_for_which_designed2.500 INCHES IN
NSN4730-01-015-9329
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 70-150-2 1/2 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 7.000 INCHES NOMINAL IN
•
FACE SEATING SURFACE CONDITION: MACHINED
•
NOMINAL PIPE SIZE FOR WHICH DESIGNED: 2.500 INCHES IN
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 301.0 FAHRENHEIT ANY ACCEPTABLE DEGF
•
FLANGE SECTION STYLE: PLAIN FACE (BLIND)
•
STYLE DESIGNATOR: ROUND, ONE BOLT HOLE CIRCLE
•
BOLT HOLE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A181,GRADE 1 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER7.000 INCHES NOMINAL IN
FACE SEATING SURFACE CONDITIONMACHINED
NOMINAL PIPE SIZE FOR WHICH DESIGNED2.500 INCHES IN
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED301.0 FAHRENHEIT ANY ACCEPTABLE DEGF
FLANGE SECTION STYLEPLAIN FACE (BLIND)
STYLE DESIGNATORROUND, ONE BOLT HOLE CIRCLE
BOLT HOLE DIAMETER0.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A181,GRADE 1 ASSN STD SINGLE MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA05047-ANSI B16.5 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
BOLT HOLE QUANTITY4
SUBSTITUTES & CROSS-REFERENCES 5
B16.5Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
ANSI B16.5Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-F-18180/6Reference document
Same NSN cross-reference
Reference document — Secondary reference
70Reference document
Same NSN cross-reference
Reference document — Secondary reference
M18180/6-007B04Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 70-150-2 1/2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-150-2 1/2?
70-150-2 1/2 is a THERMAL RELEASE,CIRCUIT BREAKER.
What parts can replace 70-150-2 1/2?
There are 5 known substitutes for 70-150-2 1/2: B16.5, ANSI B16.5, MIL-F-18180/6 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70-150-2 1/2?
70-150-2 1/2 is cataloged in the U.S. Government catalog under NSN 4730-01-015-9329. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-150-2 1/2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.