PartsTable
Technical Data Sheet
PartsTable / MRO / 70-1104
70-1104 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, body_length: 0.250 INCHES NOMINAL IN, body_diameter: 0.090 INCHES NOMINAL IN, bore_diameter: 65.00 MILLIMETERS NOMINAL MM, overall_width: 23.0 MILLIMETERS NOMINAL MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6791, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 70-1104
NSN: 3110-00-155-6791
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
body_length0.250 INCHES NOMINAL IN
body_diameter0.090 INCHES NOMINAL IN
bore_diameter65.00 MILLIMETERS NOMINAL MM
overall_width23.0 MILLIMETERS NOMINAL MM
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
load_directionRADIAL
surface_finishGROUND
document_source3T821
shield_quantity1
NSN3110-00-155-6791
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 70-1104 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHIELD QUANTITY: 1
•
LOAD DIRECTION: RADIAL
•
BORE DIAMETER: 65.00 MILLIMETERS NOMINAL MM
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL INNER RING
TECHNICAL CHARACTERISTICS (FLIS)
SHIELD QUANTITY1
LOAD DIRECTIONRADIAL
BORE DIAMETER65.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH23.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL INNER RING
MATERIALSTEEL SHIELD
MATERIALSTEEL BALL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
T7607852-1Interchangeable
interchangeable cross-reference
interchangeable
47213Interchangeable
interchangeable cross-reference
interchangeable
198453Interchangeable
interchangeable cross-reference
interchangeable
D31479Interchangeable
interchangeable cross-reference
interchangeable
UPCAT353Interchangeable
interchangeable cross-reference
interchangeable
CB1045Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70-1104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-1104?
70-1104 is a RESISTOR,FIXED,COMPOSITION. It is classified as a MRO (MRO_GENERAL).
What parts can replace 70-1104?
There are 18 known substitutes for 70-1104: T7607852-1, 47213, 198453 and 15 more. Substitute compatibility should be verified for your specific system.
Is 70-1104 still available?
70-1104 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-1104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026