70-061L226W200A — HOSE ASSEMBLY,NONMETALLIC

✓ Government record, cited

— · PIPE SECTION

PRODUCT OVERVIEW

70-061L226W200A: HOSE ASSEMBLY,NONMETALLIC.

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.688 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4720-01-324-9358, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

70-061L226W200A

NSN: 4720-01-324-9358
FSC: 4720 — Hose and Flexible Tubing
CAGE: 97499 — BELL TEXTRON INC (USA)

SPECIFICATIONS

flow_angle	90.0 DEGREES SECOND END
seat_angle	37.0 DEGREES FIRST END
temp_rating	-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class	3B FIRST END
connection_type	THREADED INTERNAL TUBE FIRST END
inside_diameter	0.688 INCHES NOMINAL IN
connection_style	SWIVEL NUT FLARE FIRST END
outside_diameter	0.961 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND SECOND END
operating_pressure	950.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure	3750.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size	1.062 INCHES SECOND END IN
NSN	4720-01-324-9358

COMPONENT DIAGRAM

KEY FEATURES

•

FLOW ANGLE: 45.0 DEGREES FIRST END

•

MEASURING METHOD AND LENGTH: 22.750 INCHES NOMINAL WORKING IN

•

TEMP RATING: -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF

•

MINIMUM INSIDE BENDING RADIUS: 4.500 INCHES IN

•

CONNECTION STYLE: SWIVEL NUT FLARE SECOND END

•

END CONNECTION DESIGN: ELBOW SECOND END

TECHNICAL CHARACTERISTICS

FLOW ANGLE	45.0 DEGREES FIRST END
FLOW ANGLE	90.0 DEGREES SECOND END
MEASURING METHOD AND LENGTH	22.750 INCHES NOMINAL WORKING IN
TEMP RATING	-65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS	4.500 INCHES IN
CONNECTION STYLE	SWIVEL NUT FLARE SECOND END
CONNECTION STYLE	SWIVEL NUT FLARE FIRST END
END CONNECTION DESIGN	ELBOW SECOND END
END CONNECTION DESIGN	ELBOW FIRST END
LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE

OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

4720-00-000-0080 4720-00-000-0081 4720-00-000-0084 4720-00-000-0724 4720-00-001-0014 4720-00-001-0015 4720-00-001-0023 4720-00-001-0025

SUBSTITUTES & CROSS-REFERENCES 1

AS202L226W00AReference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 70-061L226W200A?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 70-061L226W200A?

70-061L226W200A is a HOSE ASSEMBLY,NONMETALLIC.

What parts can replace 70-061L226W200A?

There is 1 known substitute for 70-061L226W200A: AS202L226W00A. Substitute compatibility should be verified for your specific system.

What is the NSN for 70-061L226W200A?

70-061L226W200A is cataloged in the U.S. Government catalog under NSN 4720-01-324-9358. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

70-061L226W200A — HOSE ASSEMBLY,NONMETALLIC

Request a Quote — 70-061L226W200A