PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 70-010H000V115
70-010H000V115 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B FIRST END, vacuum_in_torr: 76.2, connection_type: THREADED INTERNAL TUBE FIRST END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-880-7722, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
70-010H000V115
NSN: 4720-00-880-7722
FSC: 4720
CAGE: 80070 — LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN ROTARY AND MISSION SYSTEMS DIV RMS- C6ISR (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B FIRST END
vacuum_in_torr76.2
connection_typeTHREADED INTERNAL TUBE FIRST END
inside_diameter0.344 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.547 INCHES NOMINAL IN
thread_directionRIGHT-HAND SECOND END
features_providedREUSABLE END FITTINGS
operating_pressure1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
NSN4720-00-880-7722
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 70-010H000V115 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 0.562 INCHES FIRST END IN
•
VACUUM IN TORR: 76.2
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
OPERATING PRESSURE: 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
•
FEATURES PROVIDED: REUSABLE END FITTINGS
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE0.562 INCHES FIRST END IN
VACUUM IN TORR76.2
NOMINAL THREAD SIZE0.562 INCHES SECOND END IN
END CONNECTION DESIGNSTRAIGHT FIRST END
OPERATING PRESSURE1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
FEATURES PROVIDEDREUSABLE END FITTINGS
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF) FIRST END
THREAD DIRECTIONRIGHT-HAND SECOND END
THREAD CLASS3B FIRST END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
70010Interchangeable
interchangeable cross-reference
interchangeable
42950Interchangeable
interchangeable cross-reference
interchangeable
GGG-K-275Interchangeable
interchangeable cross-reference
interchangeable
A-A-2473Interchangeable
interchangeable cross-reference
interchangeable
GGG-K-275 TY1CL2Interchangeable
interchangeable cross-reference
interchangeable
331C001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 70-010H000V115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 70-010H000V115?
70-010H000V115 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 70-010H000V115?
There are 20 known substitutes for 70-010H000V115: 70010, 42950, GGG-K-275 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 70-010H000V115?
70-010H000V115 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-880-7722. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 70-010H000V115

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026