PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-850-000117
7-850-000117 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BAND,RETAINING is a the manufacturer industrial component. Key specifications include length: 28.250 INCHES NOMINAL IN, material: STEEL, end_style: LOOP WITH T-BOLT, thickness: 0.106 INCHES NOMINAL IN, bend_radius: 14.125 INCHES NOMINAL IN, basic_shape_style: U BEND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-272-9272, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-850-000117
NSN: 5340-01-272-9272
FSC: 5340
CAGE: 12361 — GROVE U.S. LLC DBA GROVE US LLC (USA)
SPECIFICATIONS
length28.250 INCHES NOMINAL IN
materialSTEEL
end_styleLOOP WITH T-BOLT
thickness0.106 INCHES NOMINAL IN
bend_radius14.125 INCHES NOMINAL IN
basic_shape_styleU BEND
NSN5340-01-272-9272
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-850-000117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 28.250 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
BASIC SHAPE STYLE: U BEND
•
END STYLE: LOOP WITH T-BOLT
•
BEND RADIUS: 14.125 INCHES NOMINAL IN
•
THICKNESS: 0.106 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH28.250 INCHES NOMINAL IN
MATERIALSTEEL
BASIC SHAPE STYLEU BEND
END STYLELOOP WITH T-BOLT
BEND RADIUS14.125 INCHES NOMINAL IN
THICKNESS0.106 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1KM4Interchangeable
interchangeable cross-reference
interchangeable
030829Interchangeable
interchangeable cross-reference
interchangeable
624-7167-003Interchangeable
interchangeable cross-reference
interchangeable
78145Interchangeable
interchangeable cross-reference
interchangeable
M184078145Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-850-000117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-850-000117?
7-850-000117 is a BAND,RETAINING.
What parts can replace 7-850-000117?
There are 5 known substitutes for 7-850-000117: 1KM4, 030829, 624-7167-003 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-850-000117?
7-850-000117 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-272-9272. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-850-000117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026