PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-690-184000
7-690-184000 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.160 INCHES NOMINAL IN, diameter: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN, head_style: FLAT CHAMFER, style_designator: STRAIGHT, pin_head_diameter: 0.630 INCHES NOMINAL IN, under_head_length: 2.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-202-2869, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-690-184000
NSN: 5315-01-202-2869
FSC: 5315
CAGE: 12361 — GROVE U.S. LLC DBA GROVE US LLC (USA)
SPECIFICATIONS
height0.160 INCHES NOMINAL IN
diameter0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
head_styleFLAT CHAMFER
style_designatorSTRAIGHT
pin_head_diameter0.630 INCHES NOMINAL IN
under_head_length2.500 INCHES NOMINAL IN
first_hole_diameter0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
material_document_and_classificationAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
distance_from_centerline_of_hole_to_end_of_pin0.150 INCHES NOMINAL IN
NSN5315-01-202-2869
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7-690-184000 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1211 OVERALL
•
PIN HEAD DIAMETER: 0.630 INCHES NOMINAL IN
•
DIAMETER: 0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
•
UNDER HEAD LENGTH: 2.500 INCHES NOMINAL IN
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 0.150 INCHES NOMINAL IN
•
HEAD STYLE: FLAT CHAMFER
•
FIRST HOLE DIAMETER: 0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
HEIGHT: 0.160 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1211 OVERALL
PIN HEAD DIAMETER0.630 INCHES NOMINAL IN
DIAMETER0.491 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
UNDER HEAD LENGTH2.500 INCHES NOMINAL IN
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN0.150 INCHES NOMINAL IN
HEAD STYLEFLAT CHAMFER
FIRST HOLE DIAMETER0.136 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
HEIGHT0.160 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
11233Interchangeable
interchangeable cross-reference
interchangeable
611233Interchangeable
interchangeable cross-reference
interchangeable
WAS137Interchangeable
interchangeable cross-reference
interchangeable
112B6Interchangeable
interchangeable cross-reference
interchangeable
54765Interchangeable
interchangeable cross-reference
interchangeable
C54765Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-690-184000?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-690-184000?
7-690-184000 is a PIN,STRAIGHT,HEADED.
What parts can replace 7-690-184000?
There are 12 known substitutes for 7-690-184000: 11233, 611233, WAS137 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-690-184000?
7-690-184000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-202-2869. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-690-184000

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026