PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-689-000515
7-689-000515 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include design_type: FRICTION, end_item_identification: 2330-01-303-5197 PLS TRAILER; MRAP - COUGAR, part_name_assigned_by_controlling_agency: PLUG-SEALING, opening_inside_diameter_for_which_designed: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-191-7772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-689-000515
NSN: 5340-01-191-7772
FSC: 5340
CAGE: 12361 — GROVE U.S. LLC DBA GROVE US LLC (USA)
SPECIFICATIONS
design_typeFRICTION
end_item_identification2330-01-303-5197 PLS TRAILER; MRAP - COUGAR
part_name_assigned_by_controlling_agencyPLUG-SEALING
opening_inside_diameter_for_which_designed0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
NSN5340-01-191-7772
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-689-000515 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATION2330-01-303-5197 PLS TRAILER; MRAP - COUGAR
DESIGN TYPEFRICTION
OPENING INSIDE DIAMETER FOR WHICH DESIGNED0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPLUG-SEALING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
114-018Interchangeable
interchangeable cross-reference
interchangeable
830781Interchangeable
interchangeable cross-reference
interchangeable
201004500Interchangeable
interchangeable cross-reference
interchangeable
AN931B11-16Interchangeable
interchangeable cross-reference
interchangeable
117908AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-689-000515?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-689-000515?
7-689-000515 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 7-689-000515?
There are 5 known substitutes for 7-689-000515: 114-018, 830781, 201004500 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-689-000515?
7-689-000515 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-191-7772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-689-000515

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026