PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-585-000117
7-585-000117 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.257 INCHES NOMINAL IN, overall_width: 1.562 INCHES NOMINAL IN, overall_height: 1.250 INCHES NOMINAL IN, overall_length: 4.453 INCHES NOMINAL IN, operation_method: LEVER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-083-9784, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-585-000117
NSN: 5340-01-083-9784
FSC: 5340
CAGE: 12361 — GROVE U.S. LLC DBA GROVE US LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.257 INCHES NOMINAL IN
hole_quantity4
overall_width1.562 INCHES NOMINAL IN
overall_height1.250 INCHES NOMINAL IN
overall_length4.453 INCHES NOMINAL IN
operation_methodLEVER
surface_treatmentCHROMATE OVERALL
engaging_surface_width1.250 INCHES NOMINAL IN
NSN5340-01-083-9784
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-585-000117 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.257 INCHES NOMINAL IN
•
SURFACE TREATMENT: CHROMATE OVERALL
•
MATERIAL: STEEL OVERALL
•
OPERATION METHOD: LEVER
•
ENGAGING SURFACE WIDTH: 1.250 INCHES NOMINAL IN
•
HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.257 INCHES NOMINAL IN
OVERALL WIDTH1.562 INCHES NOMINAL IN
SURFACE TREATMENTCHROMATE OVERALL
MATERIALSTEEL OVERALL
OPERATION METHODLEVER
OVERALL HEIGHT1.250 INCHES NOMINAL IN
ENGAGING SURFACE WIDTH1.250 INCHES NOMINAL IN
HOLE QUANTITY4
OVERALL LENGTH4.453 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
0161-20Interchangeable
interchangeable cross-reference
interchangeable
SFA66S3KZ88BInterchangeable
interchangeable cross-reference
interchangeable
26F6620FAInterchangeable
interchangeable cross-reference
interchangeable
845001A0093Interchangeable
interchangeable cross-reference
interchangeable
01-0256Interchangeable
interchangeable cross-reference
interchangeable
K9-2040Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-585-000117?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-585-000117?
7-585-000117 is a CATCH,CLAMPING.
What parts can replace 7-585-000117?
There are 12 known substitutes for 7-585-000117: 0161-20, SFA66S3KZ88B, 26F6620FA and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-585-000117?
7-585-000117 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-083-9784. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-585-000117

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026