7-57-169 — SHAFT,STRAIGHT

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

7-57-169: SHAFT,STRAIGHT.

The SHAFT,STRAIGHT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OVERALL, thread_class: 2B, thread_length: 0.200 INCHES NOMINAL IN, first_end_style: SLOTTED, second_end_style: SQUARE, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-076-4971, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

7-57-169

NSN: 5331-01-076-4971
NIINs: 010764971, 012412569, 014330925
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)

SPECIFICATIONS

material	STEEL COMP 1018 OVERALL
thread_class	2B
thread_length	0.200 INCHES NOMINAL IN
first_end_style	SLOTTED
second_end_style	SQUARE
thread_direction	RIGHT-HAND
first_end_location	SLOT END
nominal_thread_size	0.312 INCHES IN
first_end_slot_depth	0.050 INCHES NOMINAL IN
first_end_slot_width	0.060 INCHES NOMINAL IN
thread_series_designator	UNF
material_document_and_classification	ASTMA29 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN	5331-01-076-4971

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN

•

HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR

TECHNICAL CHARACTERISTICS

TEMP RATING	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN
HARDNESS RATING	80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE CLASS EPM OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR

SUBSTITUTES & CROSS-REFERENCES 4

0223852 ITEM 36Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-140E515-80Reference document

Same NSN cross-reference

Reference document — Secondary reference

ARP568-140MILG2 2050Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-140E688-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 7-57-169?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 7-57-169?

7-57-169 is a SHAFT,STRAIGHT.

What parts can replace 7-57-169?

There are 4 known substitutes for 7-57-169: 0223852 ITEM 36, 2-140E515-80, ARP568-140MILG2 2050 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 7-57-169?

7-57-169 is cataloged in the U.S. Government catalog under NSN 5331-01-076-4971. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

7-57-169 — SHAFT,STRAIGHT

Request a Quote — 7-57-169