PartsTable
Technical Data Sheet
Download PDF

7-5075 ITEM 13 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7-5075 ITEM 13: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER POLYURETHANE OVERALL, seal_width: 0.281 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 1.375 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN, accommodated_shaft_diameter: 0.085 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-218-1488, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-5075 ITEM 13
NSN: 5330-01-218-1488
FSC: 5330 — Packing and Gasket Materials
CAGE: 70236 — TACTAIR FLUID CONTROLS INC (USA)
SPECIFICATIONS
materialRUBBER POLYURETHANE OVERALL
seal_width0.281 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter1.375 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
accommodated_shaft_diameter0.085 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
cross-sectional_shape_styleSINGLE LIP
material_document_and_classification9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-218-1488
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-5075 ITEM 13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.281 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.375 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 0.085 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
•
MATERIAL: RUBBER POLYURETHANE OVERALL
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.281 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.375 INCHES MINIMUM AND 1.380 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION9250 FSCM 05262 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER0.085 INCHES MINIMUM AND 1.003 INCHES MAXIMUM IN
MATERIALRUBBER POLYURETHANE OVERALL
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 1
006-015Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7-5075 ITEM 13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-5075 ITEM 13?
7-5075 ITEM 13 is a SEAL,PLAIN.
What parts can replace 7-5075 ITEM 13?
There is 1 known substitute for 7-5075 ITEM 13: 006-015. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-5075 ITEM 13?
7-5075 ITEM 13 is cataloged in the U.S. Government catalog under NSN 5330-01-218-1488. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-5075 ITEM 13