PartsTable
Technical Data Sheet
Download PDF

7-48 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
Thule · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7-48: RESISTOR,VARIABLE,WIRE WOUND,NON.

A classic ski carrier with thousands of satisfied owners. Features - Tried and tested by thousands of skiers around the world. - Extra large push buttons make it easy to open the ski carrier with gloves on.

- Available in three sizes for three to six pairs of skis or two to four snowboards. - 40 cm loading space that holds up to four pairs of skis or two snow boards. - Locks are included in the product.

- One Key System compatible. With this accessory you can replace the locking cylinders to use one and the same key for all your Thule products. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-0682, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7-48
NSN: 3110-00-100-0682
NIINs: 001000682, 001567417, 001607674, 001709246, 002015161, 002324994, 005709884, 005770697, 007669960, 008123584, 008126266, 009617033, 009629742, 011130231, 011564692, 011786695, 014248451, 014337653, 014465498
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 60038 — THE TIMKEN CORPORATION (USA)
SPECIFICATIONS
shapeCURVED
materialSTEEL CORROSION RESISTING OVERALL
base_styleMEDIUM SCREW
body_styleCYLINDRICAL SERVO MOUNTED
body_width1.625 INCHES NOMINAL IN
bulb_styleA (ARBITRARY DESIGNATION)
cone_width1.8375 INCHES NOMINAL IN
body_height2.375 INCHES NOMINAL IN
body_length1.625 INCHES NOMINAL IN
shaft_styleROUND
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
NSN3110-00-100-0682
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7-48 · Thule ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NORMAL ANGLE
•
CONE CORNER RADIUS: 0.1180 INCHES NOMINAL IN
•
CONE WIDTH: 1.8375 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 3.1496 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNORMAL ANGLE
CONE CORNER RADIUS0.1180 INCHES NOMINAL IN
CONE WIDTH1.8375 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER3.1496 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7-48?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-48?
7-48 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Thule. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 7-48?
7-48 is cataloged in the U.S. Government catalog under NSN 3110-00-100-0682. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-48