PartsTable
Technical Data Sheet
Download PDF

7-4-6 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
Thule · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7-4-6: RESISTOR,VARIABLE,WIRE WOUND,NON.

A classic ski carrier with thousands of satisfied owners. Features - Tried and tested by thousands of skiers around the world. - Extra large push buttons make it easy to open the ski carrier with gloves on.

- Available in three sizes for three to six pairs of skis or two to four snowboards. - 40 cm loading space that holds up to four pairs of skis or two snow boards. - Locks are included in the product.

- One Key System compatible. With this accessory you can replace the locking cylinders to use one and the same key for all your Thule products. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-293-8154, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7-4-6
NSN: 3110-00-293-8154
NIINs: 002938154, 003834830, 004287055, 004497319, 005017995, 005022489, 005494008, 007102698, 007594571, 008626532, 009374855, 009512911, 010040084, 010242506, 010261233, 010741019, 012674440, 014520916, 014541518, 015872649, 016625591, 016751041
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 35358 — LEAVITT MACHINE CO DBA DEXTER PRECISION PRODUCTS DIV DEXTER INNOVATIVE SOLUTIONS LLC CAGE 6DQD2 HAS PURCHASE LEAV (USA)
SPECIFICATIONS
Part Number7-4-6
ManufacturerThule
NSN3110-00-293-8154
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7-4-6 · Thule ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
CUP WIDTH: 0.5938 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 2.8750 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
CUP WIDTH0.5938 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH0.7188 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.8750 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
CONE CORNER RADIUS0.0620 INCHES NOMINAL IN
STANDOUT WIDTH0.1250 INCHES NOMINAL IN
CONE WIDTH0.7188 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 7
AA59649-262Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS19081Reference document
Same NSN cross-reference
Reference document — Secondary reference
L102849-99401Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-B-187Reference document
Same NSN cross-reference
Reference document — Secondary reference
L102849L102810Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS19081-66Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 7-4-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-4-6?
7-4-6 is a RESISTOR,VARIABLE,WIRE WOUND,NON manufactured by Thule. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7-4-6?
There are 7 known substitutes for 7-4-6: AA59649-262, MS19081, L102849-99401 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-4-6?
7-4-6 is cataloged in the U.S. Government catalog under NSN 3110-00-293-8154. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-4-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.