PartsTable
Technical Data Sheet
Download PDF

7-3APC28-38 — GEARCASE-MOTOR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

7-3APC28-38: GEARCASE-MOTOR.

The GEARCASE-MOTOR is a the manufacturer industrial component. Key specifications include phase: SINGLE INPUT, duty_cycle: INTERMITTENT, temp_rating: 38.0 OPERATING CELSIUS, current_type: AC INPUT, power_rating: 0.0006 HORSEPOWER OUTPUT, winding_type: INDUCTION-WOUND ROTOR. This part is cataloged in the U.S.

Government catalog under NSN 3010-00-473-2114, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-3APC28-38
NSN: 3010-00-473-2114
FSC: 3010 — Torque Converters and Speed Changers
CAGE: 47496 — THE DEWEY ELECTRONICS CORPORATION DIV PITOMETER LOG DIVISION (USA)
SPECIFICATIONS
phaseSINGLE INPUT
duty_cycleINTERMITTENT
temp_rating38.0 OPERATING CELSIUS
current_typeAC INPUT
power_rating0.0006 HORSEPOWER OUTPUT
winding_typeINDUCTION-WOUND ROTOR
overall_width3.125 INCHES IN
time_interval20.0 MINUTES MAXIMUM ON AND 10.0 MINUTES MINIMUM OFF
overall_height3.312 INCHES IN
overall_length6.188 INCHES IN
shaft_diameter0.4375 INCHES NOMINAL SINGLE END IN
enclosure_featureOPEN
NSN3010-00-473-2114
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEARCASE-MOTOR TITLE COMPONENT PN 7-3APC28-38 MFR GEARCASE-MOTOR
KEY FEATURES
•
MOUNTING FACILITY TYPE AND QUANTITY: 4 UNTHREADED HOLE(S)
•
DUTY CYCLE: INTERMITTENT
•
PHASE: SINGLE INPUT
•
SHAFT DIAMETER: 0.4375 INCHES NOMINAL SINGLE END IN
•
FREQUENCY IN HERTZ: 60.0 INPUT
•
CURRENT TYPE: AC INPUT
•
WINDING TYPE: INDUCTION-WOUND ROTOR
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE(S)
DUTY CYCLEINTERMITTENT
PHASESINGLE INPUT
SHAFT DIAMETER0.4375 INCHES NOMINAL SINGLE END IN
FREQUENCY IN HERTZ60.0 INPUT
CURRENT TYPEAC INPUT
OVERALL LENGTH6.188 INCHES IN
WINDING TYPEINDUCTION-WOUND ROTOR
GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITIONINLINE W/ARMATURE SINGLE END
TIME INTERVAL20.0 MINUTES MAXIMUM ON AND 10.0 MINUTES MINIMUM OFF
SUBSTITUTES & CROSS-REFERENCES 4
7-1BALT1PC28-38Reference document
Same NSN cross-reference
Reference document — Secondary reference
7-1AALT1PC28-38Reference document
Same NSN cross-reference
Reference document — Secondary reference
7-3BPC28-38Reference document
Same NSN cross-reference
Reference document — Secondary reference
7-4PC28-38Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 7-3APC28-38?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-3APC28-38?
7-3APC28-38 is a GEARCASE-MOTOR.
What parts can replace 7-3APC28-38?
There are 4 known substitutes for 7-3APC28-38: 7-1BALT1PC28-38, 7-1AALT1PC28-38, 7-3BPC28-38 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-3APC28-38?
7-3APC28-38 is cataloged in the U.S. Government catalog under NSN 3010-00-473-2114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-3APC28-38