PartsTable
Technical Data Sheet
Download PDF

7-3814PC27 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7-3814PC27: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM IN, center_hole_diameter: 2.000 INCHES NOMINAL IN, cross-sectional_height: 0.091 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-043-5468, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-3814PC27
NSN: 5330-01-043-5468
FSC: 5330 — Packing and Gasket Materials
CAGE: 04823 — TACTAIR FLUID CONTROLS INC WESTERN HYDRAULICS DIV (USA)
SPECIFICATIONS
materialIRON OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM IN
center_hole_diameter2.000 INCHES NOMINAL IN
cross-sectional_height0.091 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
NSN5330-01-043-5468
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-3814PC27 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.091 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
PERIPHERAL DIAMETER: 2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: IRON OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.091 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
PERIPHERAL DIAMETER2.120 INCHES MINIMUM AND 2.130 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.000 INCHES NOMINAL IN
MATERIALIRON OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
2-3814-27Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7-3814PC27?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-3814PC27?
7-3814PC27 is a PACKING,PREFORMED.
What parts can replace 7-3814PC27?
There is 1 known substitute for 7-3814PC27: 2-3814-27. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-3814PC27?
7-3814PC27 is cataloged in the U.S. Government catalog under NSN 5330-01-043-5468. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-3814PC27