PartsTable
Technical Data Sheet
Download PDF

7-311113160-61 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7-311113160-61: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, overall_width: 1.900 INCHES NOMINAL IN, overall_height: 2.280 INCHES NOMINAL IN, overall_length: 2.750 INCHES NOMINAL IN, overall_thickness: 0.063 INCHES NOMINAL IN, end_item_identification: AH64A. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-623-3947, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-311113160-61
NSN: 5340-01-623-3947
FSC: 5340 — Hardware, Commercial
CAGE: 8V613 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
overall_width1.900 INCHES NOMINAL IN
overall_height2.280 INCHES NOMINAL IN
overall_length2.750 INCHES NOMINAL IN
overall_thickness0.063 INCHES NOMINAL IN
end_item_identificationAH64A
material_document_and_classificationAMS-QQ-A-250/4 NATIONAL SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyBRACKET
NSN5340-01-623-3947
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-311113160-61 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL THICKNESS: 0.063 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-250/4 NATIONAL SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: ALUMINUM ALLOY 2024
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.280 INCHES NOMINAL IN
OVERALL THICKNESS0.063 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-250/4 NATIONAL SPEC SINGLE MATERIAL RESPONSE
OVERALL LENGTH2.750 INCHES NOMINAL IN
OVERALL WIDTH1.900 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET
END ITEM IDENTIFICATIONAH64A
MATERIALALUMINUM ALLOY 2024
SUBSTITUTES & CROSS-REFERENCES 1
7-311113160Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 7-311113160-61?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-311113160-61?
7-311113160-61 is a BRACKET,MOUNTING.
What parts can replace 7-311113160-61?
There is 1 known substitute for 7-311113160-61: 7-311113160. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-311113160-61?
7-311113160-61 is cataloged in the U.S. Government catalog under NSN 5340-01-623-3947. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-311113160-61

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.