PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-2005
7-2005 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: PLAIN, SOLID, bore_style: W/ KEYWAY BOTH ENDS, point_type: CONVENTIONAL, tooth_form: STANDARD, body_length: 0.138 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-007-6279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-2005
NSN: 5330-00-007-6279
FSC: 5330
CAGE: 45RP7 — DRESSTA NORTH AMERICA LTD (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_stylePLAIN, SOLID
bore_styleW/ KEYWAY BOTH ENDS
point_typeCONVENTIONAL
tooth_formSTANDARD
body_length0.138 INCHES MINIMUM AND 0.158 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length2.500 INCHES NOMINAL IN
rating_methodELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity5 SINGLE COMPONENT SINGLE WINDING
coil_form_typeSOLID SINGLE COMPONENT
NSN5330-00-007-6279
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-2005 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
11439Interchangeable
interchangeable cross-reference
interchangeable
2012-T 5Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
72005Interchangeable
interchangeable cross-reference
interchangeable
8-104Interchangeable
interchangeable cross-reference
interchangeable
B4135-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-2005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-2005?
7-2005 is a COIL,RADIO FREQUENCY.
What parts can replace 7-2005?
There are 13 known substitutes for 7-2005: 11439, 2012-T 5, B94.11M and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-2005?
7-2005 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-007-6279. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-2005

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026