PartsTable
Technical Data Sheet
Download PDF

7-151-51 — 7-151-51

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

7-151-51: 7-151-51.

The 7-151-51 is a the manufacturer industrial component. Key specifications include end_item_identification: DEPOT LEVEL TEST SET, part_name_assigned_by_controlling_agency: SELF TEST ADAPTER. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-377-4575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 7-151-51
NSN: 3120-00-377-4575
NIINs: 003774575, 014326182
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 78880 — FLXIBLE CO THE (USA)
SPECIFICATIONS
end_item_identificationDEPOT LEVEL TEST SET
part_name_assigned_by_controlling_agencySELF TEST ADAPTER
NSN3120-00-377-4575
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 7-151-51 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 1.7510 INCHES MINIMUM AND 1.7530 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SPLIT, PLAIN, NO OUTSIDE FLANGES
•
BODY INSIDE DIAMETER: 1.6235 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
•
MATERIAL: OIL LUBRICATING LUBRICATION
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER1.7510 INCHES MINIMUM AND 1.7530 INCHES MAXIMUM IN
STYLE DESIGNATORSPLIT, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH1.4800 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
BODY INSIDE DIAMETER1.6235 INCHES MINIMUM AND 1.6250 INCHES MAXIMUM IN
SPECIAL FEATURESSPIRAL OIL GROOVES LOCATED 180 DEG APART,OPEN BOTH ENDS,DIM. 0.0938 IN. W BY 0.0200 IN. MIN,0.0250 IN. MAX DEEP IN
MATERIALOIL LUBRICATING LUBRICATION
MATERIALSTEEL OUTER LAYER
MATERIALCOPPER ALLOY INNER LAYER
SURFACE GROOVE LOCATION AND QUANTITY2 INTERNAL
SUBSTITUTES & CROSS-REFERENCES 2
474024Reference document
Same NSN cross-reference
Reference document — Secondary reference
069501Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7-151-51?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-151-51?
7-151-51 is a 7-151-51. It is classified as a MRO (MRO_GENERAL).
What parts can replace 7-151-51?
There are 2 known substitutes for 7-151-51: 474024, 069501. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-151-51?
7-151-51 is cataloged in the U.S. Government catalog under NSN 3120-00-377-4575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-151-51