PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-15-066STYLE234
7-15-066STYLE234 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, outside_diameter: 3.562 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 3.031 INCHES NOMINAL IN, cross-sectional_thickness: 0.250 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-922-5693, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-15-066STYLE234
NSN: 5330-00-922-5693
FSC: 5330
CAGE: 00912 — AKRON BRASS COMPANY (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
outside_diameter3.562 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter3.031 INCHES NOMINAL IN
cross-sectional_thickness0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-922-5693
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-15-066STYLE234 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
APERTURE DIAMETER: 3.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 3.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
APERTURE DIAMETER3.031 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER3.562 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
7424Interchangeable
interchangeable cross-reference
interchangeable
A-A-59282Interchangeable
interchangeable cross-reference
interchangeable
O-C-265Interchangeable
interchangeable cross-reference
interchangeable
4064-0001Interchangeable
interchangeable cross-reference
interchangeable
2168DInterchangeable
interchangeable cross-reference
interchangeable
11947&7425&7426Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-15-066STYLE234?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-15-066STYLE234?
7-15-066STYLE234 is a GASKET.
What parts can replace 7-15-066STYLE234?
There are 11 known substitutes for 7-15-066STYLE234: 7424, A-A-59282, O-C-265 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-15-066STYLE234?
7-15-066STYLE234 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-922-5693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-15-066STYLE234

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026