PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-14-116
7-14-116 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 2.500 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 2.000 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-202-4650, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-14-116
NSN: 5330-00-202-4650
FSC: 5330
CAGE: 00912 — AKRON BRASS COMPANY (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter2.500 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter2.000 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 2BC515 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-202-4650
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-14-116 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 2.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC515 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER2.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER2.000 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC515 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
7-14-079Interchangeable
interchangeable cross-reference
interchangeable
STYLE234Interchangeable
interchangeable cross-reference
interchangeable
32A8747Interchangeable
interchangeable cross-reference
interchangeable
00056410Interchangeable
interchangeable cross-reference
interchangeable
3213-7012-5Interchangeable
interchangeable cross-reference
interchangeable
32A8748Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-14-116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-14-116?
7-14-116 is a GASKET.
What parts can replace 7-14-116?
There are 13 known substitutes for 7-14-116: 7-14-079, STYLE234, 32A8747 and 10 more. Substitute compatibility should be verified for your specific system.
Is 7-14-116 still available?
7-14-116 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-14-116

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026