PartsTable
Technical Data Sheet
Download PDF

7-113100118 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

7-113100118: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM PACKING, seal_width: 0.614 INCHES MINIMUM AND 0.646 INCHES MAXIMUM IN, special_features: 2PSI MAX OPERATING PRESSURE,MIL-L-23699 OIL LUBRICANT;MFR SOURCE CONTROLLING REFERENCE (SR-7)7-113100118 CODE 8V613, accommodated_shaft_diameter: 6.250 INCHES MAXIMUM IN, part_name_assigned_by_controlling_agency: SEAL,PLAIN ENCASED-CARRIER,TRANSMISION,OUTPUT. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-165-2105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-113100118
NSN: 5330-01-165-2105
FSC: 5330 — Packing and Gasket Materials
CAGE: 02731 — MCDONNELL DOUGLAS HELICOPTER CO INC (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM PACKING
seal_width0.614 INCHES MINIMUM AND 0.646 INCHES MAXIMUM IN
special_features2PSI MAX OPERATING PRESSURE,MIL-L-23699 OIL LUBRICANT;MFR SOURCE CONTROLLING REFERENCE (SR-7)7-113100118 CODE 8V613
accommodated_shaft_diameter6.250 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencySEAL,PLAIN ENCASED-CARRIER,TRANSMISION,OUTPUT
NSN5330-01-165-2105
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-113100118 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.614 INCHES MINIMUM AND 0.646 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT DIAMETER: 6.250 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM PACKING
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.614 INCHES MINIMUM AND 0.646 INCHES MAXIMUM IN
SPECIAL FEATURES2PSI MAX OPERATING PRESSURE,MIL-L-23699 OIL LUBRICANT;MFR SOURCE CONTROLLING REFERENCE (SR-7)7-113100118 CODE 8V613
ACCOMMODATED SHAFT DIAMETER6.250 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL,PLAIN ENCASED-CARRIER,TRANSMISION,OUTPUT
MATERIALRUBBER FLUOROCARBON CLASS FPM PACKING
MATERIALMAGNESIUM ALLOY CASE
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 7-113100118?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-113100118?
7-113100118 is a SEAL,PLAIN ENCASED.
What is the NSN for 7-113100118?
7-113100118 is cataloged in the U.S. Government catalog under NSN 5330-01-165-2105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-113100118

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.