PartsTable
Technical Data Sheet
Download PDF

7-0612-1 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

7-0612-1: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, surface_finish: 16.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED, hardness_rating: 58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL, second_end_style: RADIUS, special_features: RADIUS END MAY BE CHAMFERED 25 DEGREE. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-221-5923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-0612-1
NSN: 5315-00-221-5923
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 15840 — DANLY MACHINE CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
surface_finish16.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
hardness_rating58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
second_end_styleRADIUS
special_featuresRADIUS END MAY BE CHAMFERED 25 DEGREE
features_providedCASEHARDENED
pin_overall_length0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
pin_overall_diameter0.1884 INCHES MINIMUM AND 0.1886 INCHES MAXIMUM IN
first_end_taper_angle4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
first_end_taper_length0.1305 INCHES MINIMUM AND 0.1815 INCHES MAXIMUM IN
second_end_corner_radius0.016 INCHES MINIMUM AND 0.047 INCHES MAXIMUM IN
NSN5315-00-221-5923
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 7-0612-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 16.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.1305 INCHES MINIMUM AND 0.1815 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
HARDNESS RATING: 58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.1884 INCHES MINIMUM AND 0.1886 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH16.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.1305 INCHES MINIMUM AND 0.1815 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
HARDNESS RATING58.0 ROCKWELL C MINIMUM AND 64.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.1884 INCHES MINIMUM AND 0.1886 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
FEATURES PROVIDEDCASEHARDENED
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 7-0612-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-0612-1?
7-0612-1 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 7-0612-1?
7-0612-1 is cataloged in the U.S. Government catalog under NSN 5315-00-221-5923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-0612-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.