PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-0529-3

7-0529-3 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.1721 INCHES NOMINAL IN, bore_diameter: 1.5000 INCHES NOMINAL IN, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM, inside_diameter: 0.707 INCHES MINIMUM AND 0.713 INCHES MAXIMUM IN, outside_diameter: 0.802 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-100-0777, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-0529-3
NSN: 3110-00-100-0777
FSC: 3110
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.1721 INCHES NOMINAL IN
bore_diameter1.5000 INCHES NOMINAL IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
inside_diameter0.707 INCHES MINIMUM AND 0.713 INCHES MAXIMUM IN
outside_diameter0.802 INCHES MINIMUM AND 0.808 INCHES MAXIMUM IN
style_designatorNORMAL ANGLE
overall_thickness0.102 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
cone_corner_radius0.1406 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-100-0777
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 7-0529-3 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.1721 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CONE WIDTH1.1721 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
BORE DIAMETER1.5000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
17-8715InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
17-8705InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
D50112InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
18270InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
649778InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3249634InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-0529-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-0529-3?
7-0529-3 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 7-0529-3?
There are 23 known substitutes for 7-0529-3: 17-8715, 17-8705, D50112 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-0529-3?
7-0529-3 is cataloged in the Federal Logistics Information System under NSN 3110-00-100-0777. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-0529-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026