PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7-00EA
7-00EA ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: PLASTIC POLYVINYL CHLORIDE (PVC), design_type: FRICTION, special_features: COLOR YELLOW, inside_diameter_length: 0.750 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 6.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-174-5084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7-00EA
NSN: 5340-01-174-5084
FSC: 5340
CAGE: 25205 — MOLDED DEVICES, INC. DBA MDI DIV MOLDED DEVICES (USA)
SPECIFICATIONS
materialPLASTIC POLYVINYL CHLORIDE (PVC)
design_typeFRICTION
special_featuresCOLOR YELLOW
inside_diameter_length0.750 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed6.625 INCHES NOMINAL IN
NSN5340-01-174-5084
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7-00EA MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 6.625 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
INSIDE DIAMETER LENGTH: 0.750 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
TECHNICAL CHARACTERISTICS (FLIS)
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED6.625 INCHES NOMINAL IN
DESIGN TYPEFRICTION
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SPECIAL FEATURESCOLOR YELLOW
INSIDE DIAMETER LENGTH0.750 INCHES NOMINAL IN
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
L702Upgraded Successor
successor cross-reference
successor
700Upgraded Successor
successor cross-reference
successor
194-505-9013Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7-00EA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7-00EA?
7-00EA is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 7-00EA?
There are 3 known substitutes for 7-00EA: L702, 700, 194-505-9013. Substitute compatibility should be verified for your specific system.
What is the NSN for 7-00EA?
7-00EA is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-174-5084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7-00EA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026