PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 7/16-3
7/16-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 7/16-3 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-619-0162, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
7/16-3
NSN: 5340-00-619-0162
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
Part Number7/16-3
NSN5340-00-619-0162
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 7/16-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-17091,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.510 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.036 INCHES NOMINAL IN
•
DIAMETER: 0.203 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.713 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.438 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-17091,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.510 INCHES NOMINAL IN
MATERIAL THICKNESS0.036 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DIAMETER0.203 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.713 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.438 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
MATERIALPLASTIC POLYAMIDE NYLON BAND
STYLE DESIGNATORSINGLE LOOP
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
7163Upgraded Successor
successor cross-reference
successor
2478906Interchangeable
interchangeable cross-reference
interchangeable
3716Interchangeable
interchangeable cross-reference
interchangeable
KN-59-242-M06Interchangeable
interchangeable cross-reference
interchangeable
TRU-5336Interchangeable
interchangeable cross-reference
interchangeable
988-N1900Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 7/16-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 7/16-3?
7/16-3 is a 7/16-3.
What parts can replace 7/16-3?
There are 13 known substitutes for 7/16-3: 7163, 2478906, 3716 and 10 more. Substitute compatibility should be verified for your specific system.
Is 7/16-3 still available?
7/16-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 7/16-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026