PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6X45
6X45 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include material: WOOL OVERALL, overall_width: 0.500 INCHES NOMINAL IN, overall_length: 6.000 INCHES NOMINAL IN, special_features: BOTH ENDS CUT AT 30.0 DEGREE ANGLE, style_designator: RECTANGULAR, cross-sectional_width: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-839-9358, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6X45
NSN: 5330-00-839-9358
FSC: 5330
CAGE: 08018 — BORG-WARNER CORP (USA)
SPECIFICATIONS
materialWOOL OVERALL
overall_width0.500 INCHES NOMINAL IN
overall_length6.000 INCHES NOMINAL IN
special_featuresBOTH ENDS CUT AT 30.0 DEGREE ANGLE
style_designatorRECTANGULAR
cross-sectional_width0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
cross-sectional_height0.500 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
NSN5330-00-839-9358
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6X45 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL: WOOL OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESQUARE
STYLE DESIGNATORRECTANGULAR
MATERIALWOOL OVERALL
OVERALL LENGTH6.000 INCHES NOMINAL IN
SPECIAL FEATURESBOTH ENDS CUT AT 30.0 DEGREE ANGLE
CROSS-SECTIONAL HEIGHT0.500 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
86041Interchangeable
interchangeable cross-reference
interchangeable
81165SInterchangeable
interchangeable cross-reference
interchangeable
TYPE GTP 16 AWG BLUEInterchangeable
interchangeable cross-reference
interchangeable
SAE-J1128Interchangeable
interchangeable cross-reference
interchangeable
344636-4 BLUEInterchangeable
interchangeable cross-reference
interchangeable
FP301-1 1/8IN BLUEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6X45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6X45?
6X45 is a FELT,MECHANICAL,PREFORMED.
What parts can replace 6X45?
There are 13 known substitutes for 6X45: 86041, 81165S, TYPE GTP 16 AWG BLUE and 10 more. Substitute compatibility should be verified for your specific system.
Is 6X45 still available?
6X45 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6X45

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026