PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6W2375
6W2375 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.625 INCHES NOMINAL IN, overall_length: 4.000 INCHES NOMINAL IN, outside_corner_radius: 0.375 INCHES NOMINAL IN, cross-sectional_thickness: 0.047 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-521-4356, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6W2375
NSN: 5330-00-521-4356
FSC: 5330
CAGE: 62265 — VOLVO TRUCKS NORTH AMERICA, INC. DBA (FOREIGN PARENT IS VOLVO LASTVAGNAR AB, GOTEBORG, SWEDEN.) (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.625 INCHES NOMINAL IN
overall_length4.000 INCHES NOMINAL IN
outside_corner_radius0.375 INCHES NOMINAL IN
cross-sectional_thickness0.047 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.375 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.375 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-521-4356
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6W2375 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.375 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.375 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.375 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL LENGTH4.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH2.625 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.125 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.375 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.375 INCHES NOMINAL IN
MATERIALPAPER AND GLUE OVERALL
CROSS-SECTIONAL THICKNESS0.047 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
R3032BInterchangeable
interchangeable cross-reference
interchangeable
B305Interchangeable
interchangeable cross-reference
interchangeable
2L-8058Interchangeable
interchangeable cross-reference
interchangeable
53D14336Interchangeable
interchangeable cross-reference
interchangeable
24700GInterchangeable
interchangeable cross-reference
interchangeable
SMC176652Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6W2375?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6W2375?
6W2375 is a GASKET.
What parts can replace 6W2375?
There are 19 known substitutes for 6W2375: R3032B, B305, 2L-8058 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6W2375?
6W2375 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-521-4356. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6W2375

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026