PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6N0009
6N0009 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL RING,METAL is a the manufacturer industrial component. Key specifications include ring_style: CONTRACTING CONCENTRIC, joint_style: VERTICAL JOINT, overall_width: 0.0930 INCHES NOMINAL IN, inside_diameter: 3.303 INCHES NOMINAL IN, radial_wall_thickness: 0.1300 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-094-1895, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6N0009
NSN: 5330-01-094-1895
FSC: 5330
CAGE: ZY243 — WESTRAC PTY LTD (AUS)
SPECIFICATIONS
ring_styleCONTRACTING CONCENTRIC
joint_styleVERTICAL JOINT
overall_width0.0930 INCHES NOMINAL IN
inside_diameter3.303 INCHES NOMINAL IN
radial_wall_thickness0.1300 INCHES NOMINAL IN
NSN5330-01-094-1895
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6N0009 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RADIAL WALL THICKNESS: 0.1300 INCHES NOMINAL IN
•
JOINT STYLE: VERTICAL JOINT
•
RING STYLE: CONTRACTING CONCENTRIC
•
INSIDE DIAMETER: 3.303 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RADIAL WALL THICKNESS0.1300 INCHES NOMINAL IN
OVERALL WIDTH0.0930 INCHES NOMINAL IN
JOINT STYLEVERTICAL JOINT
RING STYLECONTRACTING CONCENTRIC
INSIDE DIAMETER3.303 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
44592Interchangeable
interchangeable cross-reference
interchangeable
8A6N9Interchangeable
interchangeable cross-reference
interchangeable
15516Interchangeable
interchangeable cross-reference
interchangeable
6N9Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6N0009?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6N0009?
6N0009 is a SEAL RING,METAL.
What parts can replace 6N0009?
There are 4 known substitutes for 6N0009: 44592, 8A6N9, 15516 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6N0009?
6N0009 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-094-1895. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6N0009

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026