PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 6L3941-7S2
6L3941-7S2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, pin_overall_diameter: 0.0605 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.010 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-054-4109, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6L3941-7S2
NSN: 5315-00-054-4109
FSC: 5315
CAGE: 80063 — US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
first_end_styleCHAMFERED
pin_overall_length0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
pin_overall_diameter0.0605 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.010 INCHES NOMINAL IN
material_document_and_classificationQQ-S-763,TYPE A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-054-4109
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 6L3941-7S2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END STYLE: CHAMFERED
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.0605 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,TYPE A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
MATERIAL: STEEL COMP 303 OVERALL
•
PIN OVERALL LENGTH: 0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.010 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END STYLECHAMFERED
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.0605 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,TYPE A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
MATERIALSTEEL COMP 303 OVERALL
PIN OVERALL LENGTH0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.010 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
A146Interchangeable
interchangeable cross-reference
interchangeable
D-701Interchangeable
interchangeable cross-reference
interchangeable
7031700Interchangeable
interchangeable cross-reference
interchangeable
D15-543APC576Interchangeable
interchangeable cross-reference
interchangeable
D15-543FPC576Interchangeable
interchangeable cross-reference
interchangeable
D15-765MPC576Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 6L3941-7S2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6L3941-7S2?
6L3941-7S2 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 6L3941-7S2?
There are 16 known substitutes for 6L3941-7S2: A146, D-701, 7031700 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6L3941-7S2?
6L3941-7S2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-054-4109. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6L3941-7S2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026