PartsTable
Technical Data Sheet
Download PDF

6HDMILG3278A — BEARING,ROLLER,NEEDLE

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

6HDMILG3278A: BEARING,ROLLER,NEEDLE.

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL, bore_diameter: 0.3750 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, inner_ring_width: 0.5000 INCHES NOMINAL IN, outer_ring_width: 0.3750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-227-2803, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6HDMILG3278A
NSN: 3110-00-227-2803
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 83590 — SMITH METER INC PARTS OPN (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OR STEEL COMP 8620 OR STEEL OR STEEL COMP E50100 OR STEEL COMP E51100 OVERALL
bore_diameter0.3750 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
inner_ring_width0.5000 INCHES NOMINAL IN
outer_ring_width0.3750 INCHES NOMINAL IN
special_featuresOIL HOLE AND GROOVE IN INNER RING
style_designatorCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
surface_treatmentCHROMIUM OUTER RING OUTSIDE DIAMETER
lubrication_materialGREASE
overall_outside_diameter1.0625 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
NSN3110-00-227-2803
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 6HDMILG3278A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3750 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.0625 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3750 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORCAM ROLLER, HARDENED AND GROUND, NON-SEPARABLE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR 66 FED STD 1ST MATERIAL RESPONSE OR MIL-S-8690 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-7493 MIL SPEC 3RD MATERIAL RESPONSE OR QQ-S-624 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-633 FED SPEC 3RD MATERIAL RESPONSE OR 66 FED STD 4TH MATERIAL RESPONSE OR 66 FED STD 5TH MATERIAL RESPONSE OVERALL
OVERALL OUTSIDE DIAMETER1.0625 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESOIL HOLE AND GROOVE IN INNER RING
SURFACE TREATMENTCADMIUM EXPOSED SURFACES AS MOUNTED
SUBSTITUTES & CROSS-REFERENCES 7
8035005Reference document
Same NSN cross-reference
Reference document — Secondary reference
6NBF817YJReference document
Same NSN cross-reference
Reference document — Secondary reference
6HDANG25Reference document
Same NSN cross-reference
Reference document — Secondary reference
BACB10BN06Reference document
Same NSN cross-reference
Reference document — Secondary reference
ATF3Reference document
Same NSN cross-reference
Reference document — Secondary reference
6NBF817YJANG25Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 6HDMILG3278A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6HDMILG3278A?
6HDMILG3278A is a BEARING,ROLLER,NEEDLE.
What parts can replace 6HDMILG3278A?
There are 7 known substitutes for 6HDMILG3278A: 8035005, 6NBF817YJ, 6HDANG25 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 6HDMILG3278A?
6HDMILG3278A is cataloged in the U.S. Government catalog under NSN 3110-00-227-2803. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6HDMILG3278A

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.