PartsTable
Technical Data Sheet
Download PDF

6H5934 — LOCKING PLATE,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

6H5934: LOCKING PLATE,NUT AND BOLT.

The LOCKING PLATE,NUT AND BOLT is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, material: STEEL, style_designator: STRAIGHT, fsc_application_data: CLUTCH ASSEMBLIES,VEHICULAR, mounting_hole_diameter: 0.531 INCHES NOMINAL IN, cross-sectional_shape_style: FLAT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-423-8144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
6H5934
NSN: 5340-00-423-8144
FSC: 5340 — Hardware, Commercial
CAGE: 11083 — CATERPILLAR INC DIV CATERPILLAR DEFENSE (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
materialSTEEL
style_designatorSTRAIGHT
fsc_application_dataCLUTCH ASSEMBLIES,VEHICULAR
mounting_hole_diameter0.531 INCHES NOMINAL IN
mounting_hole_quantity2
cross-sectional_shape_styleFLAT
distance_between_mounting_hole_centers1.750 INCHES NOMINAL IN
NSN5340-00-423-8144
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 6H5934 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
FSC APPLICATION DATA: CLUTCH ASSEMBLIES,VEHICULAR
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 1.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
MOUNTING HOLE DIAMETER: 0.531 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY2
FSC APPLICATION DATACLUTCH ASSEMBLIES,VEHICULAR
DISTANCE BETWEEN MOUNTING HOLE CENTERS1.750 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
MOUNTING HOLE DIAMETER0.531 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
T290Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 6H5934?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 6H5934?
6H5934 is a LOCKING PLATE,NUT AND BOLT.
What parts can replace 6H5934?
There is 1 known substitute for 6H5934: T290. Substitute compatibility should be verified for your specific system.
What is the NSN for 6H5934?
6H5934 is cataloged in the U.S. Government catalog under NSN 5340-00-423-8144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 6H5934

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.